We offers high quality Eye and Shank Hooks as per international standards and customer specifications. The Eye Hooks that we use incorporate the following features:
Available in carbon steel and alloy steel.
Designed with a 5:1 Design Factor for Carbon Steel and 4:1 Design Factor for Alloy Steel.
Eye hooks are load rated.
Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk.
It has a pre-drilled cam which can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added.
Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties.
Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
Can be proof tested to 2-1/2 times the working Load Limit.
Low profile hook tip.
New integrated latch (S-4320) meets the World class standard for lifting.
Heavy duty stamped latch interlocks with the hook tip.
High cycle, long life spring.
When secured with proper cotter pin through the hole in the tip of hook, meets the intent of OSHA Rule 1926.550(g) for personnel hoisting.
Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
High Alloy Steel (Quenched and Tempered) material.
Use with alloy Chain Grade 80 and Wire Rope for lifting application.
Working Load Limit is 4:1.
Proof Load at 2.5 times of Work Load Limit.
Fatigue rated at 1.5 times the Work Load Limit with 20,000 cyclic test.
Master Link Master Link Assembly
Alloy chain slings are often selected when operating under high temperatures or rugged conditions that would abrade or destroy other types of slings. The chain sling that we provided is PWB Anchor's Herc-Alloy chain. They are flexible, increased strength allows for lighter, more durable and long lasting, tougher, more reliable lifting capability, easy to inspect, collapsible for convenient storage, and will adhere securely to the contours of a load. More features of the chain slings as below:
Manufactured from hardened and tempered steel
Superior performance in high impact applications
Chain tested to a load in excess of 60% of the minimum break strength based on 800MPa
100% Individually proof tested components and in accordance with AS 3776 Factory assembled Chain Slings supplied tested and tagged in accordance with AS 3775
ISO 9001 quality assurance accreditation
We provide various kind of sockets used for shipping industry. The most common ones we normally offer consist of Mooring Sockets and spelter sockets.
Open Spelter Socket
Closed Spelter Socket
Our company also stock 500cc wirelock resin compound kit for the use of fitting sockets. The specifications are as below:
Approved by Lloyds Register of Shipping, Det Norske Veritas, United States Coast Guard, Registro Italiano Navale, Germanischer Lloyd, United States Navy and American Bureau of Shipping.
100% termination efficiency.
Temperature operating range is -65° F to +240° F.
Ideal for on site applications.
No hazardous molten metal.
Improved fatigue life.
Pouring temperature without booster pack is 48° F to 110° F.
One booster pack if pouring temperature is 35° F to 48° F.
Two booster packs if pouring temperature is 27° F to 35° F.
Our company also offer various types of hardware to be combined with the slings such as hammerlocks, wire rope clips, webbing slings and etc. Kindly contact us if more other accessories requested.